Requisition ID: R10178412
Category: Engineering
Location: Baltimore, Maryland, United States of America
Clearance Type: Secret
Telecommute: No- Teleworking not available for this position
Shift: 1st Shift (United States of America)
Travel Required: Yes, 10% of the Time
Positions Available: 1
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.
As one of the largest global security companies in the world, Northrop Grumman is proud to help our nation’s military personnel make the transition to civilian careers. Approximately 1/4th of Northrop Grumman’s 90,000 employees self-identify as veterans, and more than 1,600 are reservists.
The Northrop Grumman Military Internship Program (NG-MIP) is an approved SkillBridge Program under Dept. of Defense Instruction 1322.29. The NG-MIP program is an opportunity for transitioning service members to gain valuable civilian work experience through an individual internship during their last 6 months of service, for up to 180 days. The Northrop Grumman Military internship Program is open to all ranks and experience levels. SkillBridge participants are not eligible for compensation from Northrop Grumman, as they continue to receive military compensation and benefits as active-duty service members .
Responsibilities for this internship position are:
Northrop Grumman Corporation (NGC) has developed the Northrop Grumman – Military Internship Program (DoD SkillBridge) utilizing the DoDI guidance for SkillBridge. During this program the service member will be on-site at his or her host company performing an individual internship in an entry to mid-level career type role. The service member will be on the job training supporting a work schedule equivalent to 40hrs per week. Outlined below are the Goals, Objectives, and Outcomes for the program.
Goals – Provide transitioning service members fellowship-style job skills training during the last portion(s) of their military commitment. This program is specifically designed to offer internships that result in the potential to transition to a full-time opportunity as the conclusion of the training. Interns will serve as a pipeline for high-speed, motivated military candidates into NGC.
Objectives - Service Members who complete the Intern program will be highly-trained, capable, future employees that align to the specific needs of the organization and are prepared to meet the NG mission “Defining Possible” on Day 1. This program provides a comprehensive internship experience including professional development, networking with leadership, and training specifically focused on NG leadership principles, company history, customer/stakeholder engagement, product and service overview, and core job responsibilities.
Outcome – Offer transitioning service member a rewarding opportunity to join the Northrop Grumman team.
DoD SkillBridge Eligibility:
Has served at least 180 days on active duty
Is within 12 months of separation or retirement
Will receive an honorable discharge
Has taken any service TAPS/TGPS
Has attended or participated in an ethics brief within the last 12 months
Received Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of internship.
AMS E&S is seeking engineers with experience and interest in electronic assembly and packaging design.
What You’ll get to Do:
Designing, modeling, and verifying RF/microwave, and mixed signal assemblies and subsystems
Utilize analysis, simulations and prototyping to develop antenna and signal conversion designs
Deriving and trading requirements with components, assembly and subsystem engineers
Performing electromagnetic simulation of component, assembly, and subsystem level performance
Managing RF budgets, frequency planning, and common assembly level interfaces
Predicting assembly level performance through selecting materials, components, and packaging approaches, RF chain analysis, electromagnetic simulation, data collection and analysis, and other modeling techniques
Develop custom RF integrated circuit designs to meet assembly and subsystem level requirements
Collaborating with peer functions such as Mechanical, Manufacturing, Quality, Supply Chain, and Test
Utilizing world class manufacturing capabilities both on-site and within the broader company for prototyping through full rate production from the foundry level to microelectronic packaging to printed circuit board fabrication and assembly to subsystem level integration and test
Working directly with a wide variety of different external supplier partners including leading domestic foundries, printed circuit board fabricators and assemblers, component manufacturers, material fabricators, and more
Supporting products throughout the product life cycle (EMD, production, sustainment, DMS)
RF and mixed signal assembly product types include antenna radiators, circulators, device interposers, filters, manifolds, receiver / exciter assemblies, signal conditioning assemblies, signal generators, and transmit / receive assemblies
RF and mixed signal subsystem product types include antenna and receiver/exciter subsystems
This requisition may be filled as an Engineer or a Principal Engineer.
Engineer Basic Qualifications:
Electrical Engineering or related STEM field degree: Bachelor of Science with 2 years of RF/microwave experience; Masters degree with 0 years of RF/microwave experience. An additional 4 years of experience will be considered in lieu of a degree
US Citizenship is required
Must have an Interim Secret Clearance Minimum Prior to start
Ability to use and apply technical standards, principles, theories, concepts and techniques to a broad variety of RF/Microwave design and test related problems of moderately complex difficulty. Solutions are imaginative, thorough, and practical, but work is still reviewed under general supervision.
Developing proficiency in one or more areas of RF/Microwave discipline including but not limited to: RF components, assemblies, subsystems, requirements development, EM and related modeling & simulation, RF test verification, production test support, and design for producibility
Exhibit entry-level proficiency with industry standard RF/Microwave modeling, simulation and printed circuit board design tools (i.e. ANSYS HFSS/Maxwell, CST Microwave, Eagleware/Genesys, Keysight ADS, Xpedition, Altium, FEKO, TICRA)
General knowledge of electrical engineering design software and equipment
Principal Engineer Basic Qualifications:
Electrical Engineering or related STEM field degree: Bachelor of Science with 5 years of RF/microwave experience; Masters degree with 3 years of RF/microwave experience; or PhD degree. an additional 4 years of experience will be considered in lieu of a degree
US Citizenship is required
Must have an Interim Secret Clearance Minimum Prior to start
Ability to provide sound solutions to a broad variety of RF/Microwave design and test related problems of complex difficulty. Solutions are imaginative, thorough, and practical.
Developing subject matter expertise in one or more areas of RF/Microwave discipline including but not limited to: RF components, assemblies, subsystems, requirements development, EM and related modeling & simulation, RF test verification, production test support, and design for producibility
Exhibit intermediate to expert proficiency with industry standard RF/Microwave modeling, simulation and printed circuit board design tools (i.e. ANSYS HFSS/Maxwell, CST Microwave, Eagleware/Genesys, Keysight ADS, Xpedition, Altium, FEKO, TICRA)
Proven knowledge of electrical engineering design software and equipment
Preferred Qualifications:
- Top Secret / SCI security clearance
This role is contingent upon being Funded and the Ability to Obtain and Maintain a Secret Clearance.
Salary Range: $85,400 - $128,000
Salary Range 2: $105,400 - $158,000
The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.
Employees may be eligible for a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.
The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.